饲料中动物源性成分显微近红外光谱检测分析

探讨了应用显微近红外光谱分析技术检测饲料中动物源性成分的可行性.利用12个动物源性成分饲料样品和14个植物源性成分饲料样品建立偏最小二乘定标模型,数学预处理方法为导数+多元散射校正,利用平均光谱来优化模型实现数据压缩,模型的决定系数、交互验证标准差分别为0.969、0.090.4个配合饲料样品作为外部验证未出现误判.结果表明显微近红外光谱分析技术可用于检测饲料中动物源性成分.     

板材三维曲面的无模多点闭环成形技术

基于具有并行调形功能的多点快速曲面造型系统和自主开发的激光扫描测量机，提出了三维板类件多点闭环精确造型的概念，并应用PID控制算法进行了多点闭环成形实验，得到了符合设计要求的工件形状。讨论了三维板类件多点成形逆向工程的实现问题。     

基于高压电技术的烟气脱硫研究与应用进展

分析与评述了国内外基于高压静电技术的烟气脱硫研究与应用进展,介绍了几种以高压电技术为基础的烟气脱硫新技术--电子束烟气脱硫、脉冲电晕等离子法脱硫、荷电干法烟气脱硫和荷电喷雾烟气脱硫技术;并且分析了这几种烟气处理技术的作用原理、特点和发展现状,展望了其应用前景.     

利用CT扫描技术确定土壤大孔隙分形维数

土壤大孔隙的大小、形状和分布对水及溶质在土壤中的运移有着深刻影响,由于土壤大孔隙的分布呈现分形规律,根据采用CT扫描法得到的原状土柱各断面图像,采用计盒维数法计算出各断面土壤大孔隙的分形维数。     

TOTAL SKIN ELECTRON THERAPY TECHNIQUE FOR THE CANINE PATIENT

Cutaneous epitheliotropic T‐cell lymphoma in canine patients is a radiation sensitive tumor but total skin electron therapy is used only rarely. Our purpose was to evaluate dose distribution from a total skin electron therapy technique using 6 MeV electron beams. The treatment was comprised of 12 fields, with the dog in lateral recumbency in a stride position at an extended distance from the source. Uniformity, flatness and symmetry were determined for each beam. The composite percent depth dose profile for all beams was measured in solid water phantoms and skin dose was determined on a canine cadaver using thermoluminescent dosimeters. The resulting d_max of the composite beams was 1 mm and dose variation over the skin was 6.8%, with the extremities having the most uneven dose distribution. Dimensions of the fields were adequate to obtain an effective treatment profile for the entire thickness of canine epidermis and the technique was feasible for clinical application. Individual tailoring of the protocol to deal with hot and cold spots may be necessary and set up will likely involve a significant time commitment for the therapy team.     

芒果不同品种果实的显微结构与品质的关系初探

采用紫花芒、桂香芒、红象牙和印度1号芒果的果实,通过扫描电子显微镜观察,发现果实皮孔少,开口小,蜡质密度大的紫花芒果实耐贮藏。分泌腔多的桂香芒和印度1号果实芳香味浓。果肉薄壁细胞中淀粉粒增多,果实愈趋近成热。薄壁细胞中淀粉粒多的桂香芒,果实后熟后含糖量高。     

基于三维激光扫描技术的粮食储量监测系统的设计与试验

为实现仓储粮储量在线实时监测,该研究开发了一种基于三维激光扫描技术的粮食储量在线监测系统。采用自主研制的倒置式粮仓专用型三维激光扫描仪对储粮进行扫描,通过上位机通讯、采集点云数据并控制扫描仪的工作过程,应用粮食体积计算软件实时计算储粮体积和数量,从而解决了仓储粮储量快速高精度监测的问题。使用该系统在中储粮某直属库进行系统验证试验,结果表明,测量得到的粮食体积满足最大误差不超过1%的技术指标,且经过多次试验检验,系统具有较好的稳定性、测量精度高、操作简便等优点,能够满足仓储粮储量监测的要求。该研究为实现仓储粮储量的快速实时在线监测提供了有效的方法。     

苹果浓缩汁二次混浊物的形态分析

通过苹果浓缩汁二次混浊物的形态分析以及浊度测定，初步确定混浊物的化学成分，为果汁生产、贮存中混浊的控制提供依据。将二次混浊果汁和后混浊果汁经乙酸双氧铀负染，观察其在透射式电镜下的形态并测定其浊度。结果表明：苹果浓缩汁经-18℃，冷冻8～10h处理后，苹果浓缩汁混浊减轻；再煮沸冷冻的果汁，混浊增加；二次混浊苹果浓缩汁形成的颗粒经乙酸双氧铀负染在透射式电镜下有蛋白质球状颗粒和链状的多酚类颗粒，或自身聚合或相互聚合形成大的颗粒；贮藏6个月的苹果浓缩汁后混浊比二次混浊严重。初步确定苹果浓缩汁的二次混浊物主要是蛋白质和酚类以及两者自身或相互聚合的产物。     

Optimization potential for perception-oriented appearance classification by simulated sawing of computed tomography-scanned logs of Norway spruce

Abstract

Wood, as a natural material, has favourable properties in both technical and aesthetic aspects. Due to its inherent variability, production of high-quality sawn timber demands adequate control of log conversion, which is feasible with computed tomography (CT) log scanning. Existing appearance grading rules for sawn timber might not fully reflect people's visual perception of wood surfaces, and therefore, an alternative, more perception-oriented appearance classification could be beneficial. An appearance classification of sawn timber based on partial least squares discriminant analysis (PLS-DA) of knot-pattern variables was developed and tested. Knot-pattern variables derived from images of board faces were used in training PLS-DA models against an initial classification of the board faces previously established by aid of cluster analysis. Virtual board faces obtained from simulated breakdown of 57 CT-scanned Norway spruce logs were graded according to the developed classification. Visual assessment of the grading results indicated that the classification was largely consistent with human perception of board appearance. An initial estimation of the potential to optimize log rotation, based on CT data, for the established appearance grades was derived from the simulations. Considerable potential to increase the yield of a desired appearance grade, compared to conventional log positioning, was observed.     

Characterization of mobile LiDAR data collected with multiple echoes per pulse from crowns during foliation

Abstract

As a state-of-the-art technology for fine-scale forest investigation, mobile terrestrial light detection and ranging (LiDAR), also referred to as mobile laser scanning (MLS), recently has been increasingly exploited to improve its performance on this task. One potential solution is to apply special MLS systems with the capability of collecting multiple echoes per pulse (multi-echoes, for short) from canopies. The methodologies of this rationale turned out to perform better but still insufficiently for canopy properties retrieval, owing to their common defective premise. That is, the knowledge of the characteristics of MLS scan data comprising multi-echoes, so far, is in shortage, especially when regarding the dynamic process of tree foliation. As a pioneering work for this challenge, this study attempted to comprehensively analyze the characteristics of MLS multi-echoes collected from tree crowns during foliation. Specifically, new stable multi-echoes-related features were deduced under the schematic frame of relative quantification, in both spatial and temporal sense. “Relative” here briefly means the division operation deployed on the attributes of multi-echoes, individually in terms of the number of echoes, echo width and crown volume integrity, between their different return orders. Then, the “relative” schematic was primarily validated for more stably representing crown properties during foliation, based on the real data that was collected by the Sensei MLS system with a maximum of three echoes per pulse. Further, a case of tree species classification was examined using a linear discriminant classifier, and it was testified that the resultant temporal statistical rules of multi-echoes as the reverse clues can enhance the performance of MLS in applications.